The texture is cut for the background using a graver, it radiates outwards from …Bit by bit the texture goes into the background.Counter enamelling the back of the piece with hard transparent flux to balance the …Spreading the hard flux into the texture and into the graver lines. This provides …I used a brush here to move a thin layer of flux over the …Here's my bench mid-way through the cloisonné process. I do the wires in sections …It's coming along. The house that Saint Kyneburgha is carrying in her left-hand proved …I've skipped forward quite a few steps here to the enamel application, this has …Adding as much colour for each firing reduces the number of firings and this …After firing, I've deliberately under-fired it, as you can see the enamel has not …The enamel level is building up. I'm trying to get it to just be …Adding more enamel to the parts that are still too low.After the piece has just come out of the kiln, the blue background has …The pallet for Saint Kyneburgha. I use a variety of colours and grain sizes. …